Connection Window Screen Elements

This section lists all of the tabs, buttons, drop-down boxes, checkboxes, and text boxes on the EMUE Connection Settings window, and indicates their purpose. This window is available by selecting Tools>Connections from the EMUE Toolbar. Controls are listed from upper left to lower right.

Many of these options are also available using the SetStartup scripting commands. They are cross-referenced in the table below.

Tab	Label Or Text	Control Type	Function
Connection Settings	Interface Type	Drop-Down	Used to display the current network interface type used to connect to the mainframe. This can be changed by selecting an entry from the drop-down list.
TN3270	SNA Server 1	Textbox	Used to identify the current name of the first server that EMUE will use when attempting to establish a TN3270 connection. The current name is displayed in the window and can be changed by typing over the entry.
TN3270	SNA Server 2	Textbox	Used to identify the current name of the second server that EMUE will use if SNA Server 1 is unavailable when attempting to establish a TN3270 connection. The current name is displayed in the window and can be changed by typing over the entry.
TN3270	Device Name	Textbox	Used to identify the LU that EMUE will use when connecting to the mainframe. The current LU is displayed in the window and can be changed by typing over the entry. If this is left blank, EMUE will attempt to obtain an LU from the Telnet server.
Connection Timeout	TN3270ConnectionTimeout	Numeric Up Down	Used to specify the maximum out amount of time that Rumba will wait for each TN3270 server.
Novel SAA	Logon Option	Drop-Down	A selection from this list is used to define how credentials are supplied when EMUE makes a connection to the SNA gateway using Novell SAA. The current setting is displayed in the window.
Novel SAA	User Name	Textbox	Used to identify the username that EMUE will use when connecting to the SNA gateway using Novell SAA. The current User Name is displayed in the window and can be changed by typing over the entry.
Novel SAA	Password	Textbox	Used to identify the password that EMUE will use when connecting to the SNA gateway using Novell SAA. The current password is displayed in the window and can be changed by typing over the entry.
Novel SAA	Load Balancing	Checkbox	Checking this box instructs EMUE to enable Novell SAA load balancing for this connection.
Novel SAA	Hot Standby	Checkbox	Checking this box instructs EMUE to enable the Novell SAA Hot Standby capability.
Novel SAA	TCP/IP Timeout	Numeric Up Down	Used to identify the number of seconds that Novell SAA is to wait when making a TCP/IP connection. The current setting is displayed in the window and can be changed by typing over the entry.
Novel SAA	Service Name	Textbox	Used to identify the name of the service that EMUE will use to set the Novell SAA Service option. The current setting is displayed in the window and can be changed by typing over the entry.
Novel SAA	LU Category	Drop-Down	Select from the list to define the type of LU that EMUE will use when establishing a connection to the mainframe. The current setting is displayed in the window.
Novel SAA	LU/Group Name	Textbox	Used to identify the LU or Group name EMUE is to use when establishing a connection to the mainframe. The current setting is displayed in the window and can be changed by typing over the entry.
Novel SAA	Server Identifier	Drop-Down	Select from the list to define the method used to identify the Novell SAA Server when EMUE establishes connection to the mainframe. The current setting is displayed in the window.
Novel SAA	Server Name	Textbox	Used to identify the name of the Novell SAA Server that EMUE will use to establish the connection to the mainframe. The current setting is displayed in the window and can be changed by typing over the entry.
Novel SAA	Server Address	Textbox	Used to identify the address of the Novell SAA server that EMUE will use to establish the connection to the mainframe. The current setting is displayed in the window and can be changed by typing over the entry.
MS-SNA	LU Selection	Drop-Down	Select from the list to define the method to be used by the SNA client to obtain the LU for this session. The current setting is displayed in the window.
MS-SNA	LU Name	Textbox	Used to identify the name of the LU or LU Pool that will be used by the SNA client for this session. The current setting is displayed in the window and can be changed by typing over the entry.
MS-SNA	LU Index	Textbox	Used to specify the LU Index that will be used by the SNA client for this session. The current setting is displayed in the window and can be changed by typing over the entry.
ALL	OK	Button	Instructs EMUE to apply the selected option settings for all of the tabs and to close the Connection window.
ALL	Cancel	Button	Instructs EMUE to close this window without applying any changes.
ALL	Apply	Button	Instructs EMUE to apply the selected option settings for all of the tabs and leaves the window open on the current tab selection.